標題: Microstructure evolution during electromigration in eutectic SnPb solder bumps
作者: Lu, CM
Shao, TL
Yang, CJ
Chen, C
材料科學與工程學系
Department of Materials Science and Engineering
公開日期: 1-Aug-2004
摘要: A technique has been developed to facilitate analysis of the microstructural evolution of solder bumps after current stressing. Eutectic SnPb solders were connected to under-bump metallization (UBM) of Ti/Cr-Cu/Cu and pad metallization of Cu/Ni/Au. It was found that the Cu6Sn5 compounds on the cathode/chip side dissolved after the current stressing by 5 x 10(3) A/cm(2) at 150 degreesC for 218 h. However, on the anode/chip side, they were transformed into (NixCu1-x)(3)Sn-4 in the center region of the UBM, and they were converted into (Cu-y,Ni1-y)(6)Sn-5 on the periphery of the UBM. For both cathode/substrate and anode/substrate ends, (Cu-y,Ni1-y)(6)Sn-5 compounds were transformed into (Ni-x,Cu1-x)(3)Sn-4. In addition, the bumps failed at cathode/chip end due to serious damage of the UBM and the Al pad. A failure mechanism induced by electromigration is proposed in this paper.
URI: http://dx.doi.org/10.1557/JMR.2004.0305
http://hdl.handle.net/11536/26525
ISSN: 0884-2914
DOI: 10.1557/JMR.2004.0305
期刊: JOURNAL OF MATERIALS RESEARCH
Volume: 19
Issue: 8
起始頁: 2394
結束頁: 2401
Appears in Collections:Articles


Files in This Item:

  1. 000223068100026.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.