標題: Modeling of piezoelectric actuator for compensation and controller design
作者: Tzen, JJ
Jeng, SL
Chieng, WH
機械工程學系
Department of Mechanical Engineering
關鍵字: piezoelectric actuator;hysteresis model;inverse model compensation
公開日期: 1-一月-2003
摘要: This work proposes a novel method for describing the hysteretic non-linearity of a piezoelectric actuator. The hysteresis behavior of piezoelectric actuators, including the minor loop trajectory and the residual displacement near zero input, are modeled by a set of hysteresis operators, including a gain and an input-dependent lag, as well as the parameter scheduling method. A hysteresis model, using the identified parameters, and containing only the dominant hysteresis operator, is presented herein. Based upon a simplified hysteresis model, tracking is-controlled to reduce the non-linear effects in the characteristics of the piezoelectric actuator. A proportional-integral (PI) controller, with inverse model feed-forward, suppresses the tracking error to within +/-1% full span range (FSR) of the actuator, noticeably improving the tracking performance of the piezoelectric actuator. (C) 2002 Elsevier Science Inc. All rights reserved.
URI: http://dx.doi.org/10.1016/S0141-6359(02)00183-6
http://hdl.handle.net/11536/28222
ISSN: 0141-6359
DOI: 10.1016/S0141-6359(02)00183-6
期刊: PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
Volume: 27
Issue: 1
起始頁: 70
結束頁: 86
顯示於類別:期刊論文


文件中的檔案:

  1. 000180406200009.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。