The effects of growth temperature on the microstructure and electrical barrier height in PtSi/p-Si(100) Schottky barrier detector

檔案

日期

2000-10-03

類型

期刊名稱

THIN SOLID FILMS

卷期與頁次

第 374 卷第 1 期,頁 80–84

ISSN

0040-6090

語言

英文

摘要

The effects of growth temperature on the microstructure and electrical barrier height of the PtSi Schottky barrier detector (SBD) have been investigated. PtSi films, 4 nm in thickness were deposited at various temperatures ranging from 350 to 550 degreesC. The electron diffraction patterns showed that PtSi film formed at 350 degreesC depicts an intermingling of both (1 (1) over bar1) and (1 (2) over bar1) orientations. However, only (1 (2) over bar1) orientation was shown when the PtSi films were formed above 450 degreesC. Moreover, SBD formed at 350 degreesC was found to depict an electrical barrier that is approximately 0.02 eV higher than those formed above 450 degreesC. Although the microstructure and the electrical barrier height of the PtSi film do not change when the formation temperature was further increased from 450 to 550 degreesC. Nevertheless, the higher formation temperature resulted in a larger grain size, indicating that grain size alone does not affect the barrier height of the resultant SBD. (C) 2000 Elsevier Science S.A. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Horng, G., Chang, C., Ho, C., Lee, C., & Huang, T. (2000). The effects of growth temperature on the microstructure and electrical barrier height in PtSi/p-Si(100) Schottky barrier detector. THIN SOLID FILMS, 374(1), 80–84. https://doi.org/10.1016/S0040-6090(00)01063-4

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/30207