1. You are Here：

Full metadata record
DC FieldValueLanguage
dc.contributor.authorHung, Chien-Hsiangen_US
dc.contributor.authorYu, Tsung-Hanen_US
dc.contributor.authorCheng, Jung-Anen_US
dc.contributor.authorChang, Chi-Hsienen_US
dc.contributor.authorHsiau, Yi-Hauen_US
dc.contributor.authorTien, Chung-Haoen_US
dc.contributor.authorLi, Tsung-Yangen_US
dc.contributor.authorMo, Chi-Nengen_US
dc.date.accessioned2014-12-08T15:45:26Z-
dc.date.available2014-12-08T15:45:26Z-
dc.date.issued2008en_US
dc.identifier.issn0097-966Xen_US
dc.identifier.urihttp://hdl.handle.net/11536/30597-
dc.description.abstractThis research uses Ink-jet printer process to fabricate microlens on the bottom of a LGP in a fast and cost-effective way. Compared with typical dot printing method, Ink-jet printing is able to save 50% material consumption. In addition, the microlens with UV-curable epoxy could be well controlled in the radius, contact angle and arbitrary arrangement. A 20x20cm(2) LGP can be fabricated with desired microlens pattern within 10 seconds, which exhibits a potential to apply ink-jet process upon the high-speed mass production.en_US
dc.language.isoen_USen_US
dc.subjectmicrolensen_US
dc.subjectink-jet printingen_US
dc.subjectlight-guiding plateen_US
dc.titleMicrolens array by ink-jet technology for LCD backlight applicationsen_US
dc.typeArticleen_US
dc.identifier.journal2008 SID INTERNATIONAL SYMPOSIUM, DIGEST OF TECHNICAL PAPERS, VOL XXXIX, BOOKS I-IIIen_US
dc.citation.volume39en_US
dc.citation.spage1553en_US
dc.citation.epage1555en_US
dc.contributor.department光電工程學系zh_TW
dc.contributor.departmentDepartment of Photonicsen_US
dc.identifier.wosnumberWOS:000258530100395-
Appears in Collections:Conferences Paper


Related Contents
Loading...