標題: | Investigation of bubble effect in microfluidic fuel cells by a simplified microfluidic reactor |
作者: | Shyu, Jin-Cherng Wei, Chung-Sheng Lee, Ching-Jiun Wang, Chi-Chuan 機械工程學系 Department of Mechanical Engineering |
關鍵字: | Microfluidic;Solubility;Gas/liquid two-phase flow;Fuel cell |
公開日期: | 1-Sep-2010 |
摘要: | This study experimentally examines the influence of two-phase flow on the fluid flow in membraneless microfluidic fuel cells. The gas production rate from such fuel cell is firstly estimated via corresponding electrochemical equations and stoichiometry from the published measured current-voltage curves in the literature to identify the existence of gas bubble. It is observed that O(2) bubble is likely to be generated in Hasegawa's experiment when the current density exceeds 30 mA cm(-2) and 3 mA cm(-2) for volumetric flow rates of 100 mu L min(-1) and 10 mu L min(-1), respectively. Besides, CO(2) bubble is also likely to be presented in the Jayashree's experiment at a current density above 110 mA cm(-2) at their operating volumetric liquid flow rate, 0.3 mL min(-1). Secondly, a 1000-mu m-width and 50-mu m-depth platinum-deposited microfluidic reactor is fabricated and tested to estimate the gas bubble effect on the mixing in the similar microchannel at different volumetric flow rates. Analysis of the mixing along with the flow visualization confirm that the membraneless fuel cell should be free from any bubble, since the mixing index of the two inlet streams with bubble generation is almost five times higher than that without any bubble at the downstream. (C) 2010 Elsevier Ltd. All rights reserved. |
URI: | http://dx.doi.org/10.1016/j.applthermaleng.2010.04.029 http://hdl.handle.net/11536/32246 |
ISSN: | 1359-4311 |
DOI: | 10.1016/j.applthermaleng.2010.04.029 |
期刊: | APPLIED THERMAL ENGINEERING |
Volume: | 30 |
Issue: | 13 |
起始頁: | 1863 |
結束頁: | 1871 |
Appears in Collections: | Articles |
Files in This Item:
If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.