Connecting interface for modularization of digital microfluidics - art. no. 68860L
檔案
- 000255942400019.pdf (2.83 MB, Adobe PDF)
日期
2008
類型
系所
期刊名稱
MICROFLUIDICS, BIOMEMS, AND MEDICAL MICROSYSTEMS VI
卷期與頁次
第 6886 卷,頁 L8860
ISSN
0277-786X
ISBN
978-0-8194-7061-4
語言
英文
摘要
Here, interconnection technique to link digital microfluidic chips is proposed. Three kinds of digital microfluidic modules with connecting interface, including flexible module and two types of connector modules, are designed and fabricated. Since these modules are fabricated on a compliant polymer-based substrate (ITO PET), chip-to-chip droplet transportation even at different planes can be achieved by the proposed technique. A low-temperature fabrication process is developed for the polymer substrates, where the SU-8 acts as the insulator. Droplet transportation through electrowetting on curved surface is confirmed by testing on the bended flexible modules with different curvatures from 0 to 0.06 mm(-1) at around 70 V-AC. Then the droplet transportations between flexible and connector modules are investigated. It is found that the gap size between two modules and the sidewall profiles at interface affect the droplet transportation directly. For the gap size around 50 mu m with a smooth perpendicular sidewall profile, 80 V-AC is shown to actuate droplet of 1.5 mu l, 2.5 mu l, or 3.5 mu l to cross over the interface successfully.
所屬典藏
會議論文引用此條目
Yang, H., Fan, S.-K., & Hsu, W. (2008). Connecting interface for modularization of digital microfluidics - art. no. 68860L. MICROFLUIDICS, BIOMEMS, AND MEDICAL MICROSYSTEMS VI, 6886, L8860. https://doi.org/10.1117/12.765652
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/32464