完整後設資料紀錄
DC 欄位語言
dc.contributor.authorCHANG, PHen_US
dc.contributor.authorCHEN, HMen_US
dc.contributor.authorLIU, HYen_US
dc.date.accessioned2014-12-08T15:04:46Z-
dc.date.available2014-12-08T15:04:46Z-
dc.date.issued1992-10-01en_US
dc.identifier.issn0021-8979en_US
dc.identifier.urihttp://dx.doi.org/10.1063/1.351524en_US
dc.identifier.urihttp://hdl.handle.net/11536/3282-
dc.description.abstractThe effect of doping 1 wt % Si or 0.9 wt % Cu to Al films on the interactions between Al and TiW barrier layers at 450-degrees-C was studied. It was found that the first product is always Al12W, which forms at the Al/TiW interface, irrespective of the dopant addition. However, doping 1 wt % Si to Al film enhances the Al12W formation while doping 0.9 wt % Cu retards its formation. With excess tungsten in the system, Al12W would further react with W to form Al/W compounds with higher W content. In pure Al film, both the hexagonal Al5W phase and the monoclinic Al4W phase were detected to form after prolonged annealing at 450-degrees-C. The addition of 1 wt % Si or 0.9 wt % Cu to Al prohibits the formation of Al5W, thus only the Al4W phase was observed at the W/Al12W interface in the doped Al films.en_US
dc.language.isoen_USen_US
dc.titleTHE EFFECT OF SI AND CU ON THE INTERACTIONS BETWEEN AL FILMS AND A TIW BARRIER LAYERen_US
dc.typeArticleen_US
dc.identifier.doi10.1063/1.351524en_US
dc.identifier.journalJOURNAL OF APPLIED PHYSICSen_US
dc.citation.volume72en_US
dc.citation.issue7en_US
dc.citation.spage2739en_US
dc.citation.epage2742en_US
dc.contributor.department材料科學與工程學系zh_TW
dc.contributor.departmentDepartment of Materials Science and Engineeringen_US
dc.identifier.wosnumberWOS:A1992JT00700026-
dc.citation.woscount6-
顯示於類別:期刊論文