標題: Cross-coupled precompensation method for the contouring accuracy of computer numerically controlled machine tools
作者: Chin, JH
Lin, TC
交大名義發表
機械工程學系
National Chiao Tung University
Department of Mechanical Engineering
公開日期: 1-七月-1997
摘要: A cross-coupled precompensation method (CCPM) for precise trajectories of machine tools is proposed in this study. Compared with the conventional cross-coupled system and uncoupled system by computer simulation and experiment, the pure precompensation method is better in dealing with the circular trajectory and the elimination of the steady-state errors, while the CCPM can achieve the most precise tracking for both linear and circular trajectory at any feedrate. The advantages of CCPM will be enhanced at higher feedrates. At a feedrate of 200 mm/sec the CCPM stands out significantly. (C) 1997 Elsevier Science Ltd.
URI: http://hdl.handle.net/11536/455
ISSN: 0890-6955
期刊: INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Volume: 37
Issue: 7
起始頁: 947
結束頁: 967
顯示於類別:期刊論文


文件中的檔案:

  1. A1997XF14000005.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。