完整後設資料紀錄
DC 欄位語言
dc.contributor.author黃宏和en_US
dc.contributor.authorHuang, Hung-Heen_US
dc.contributor.author陳鴻祺en_US
dc.contributor.authorChen, Hung-Chien_US
dc.date.accessioned2014-12-12T01:46:47Z-
dc.date.available2014-12-12T01:46:47Z-
dc.date.issued2010en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#GT079812512en_US
dc.identifier.urihttp://hdl.handle.net/11536/46866-
dc.description.abstract本文描述以電流源供電之永磁同步馬達驅動的策略,是使用降壓型直流直流轉換器取代理想電流源,再接上三相變頻器以驅動馬達。由於所使用之永磁同步馬達須以霍爾元件感測轉子的位置,但是在許多環境下,無法準確使用霍爾元件進行位置感測,於是本文提出無位置感測控制策略,以端電壓偵測電路偵測端電壓之交會點為基礎。利用交會點來得到準確的開關換相點,進而達到驅動與控制的目的。最後利用模擬與實作結果來驗證所提無位置感測控制策略。zh_TW
dc.description.abstractIn the thesis, current-source-inverter(CSI)-fed PMSM drive is studied. The current source inverter is obtained by step-down dc-dc and six-switch inverter. In PMSM drive, rotor position should be sensed to provide adequate commutation signals. In this thesis, position sensorless control is proposed, and it is based on the motor terminal voltages. Simulation and experimental results are also provided to demonstrate the validity of the proposed CSI-fed sensorless control.en_US
dc.language.isozh_TWen_US
dc.subject電流源反流器zh_TW
dc.subject無位置感測zh_TW
dc.subject永磁同步馬達zh_TW
dc.subjectCurrent Source Inverteren_US
dc.subjectPosition Sensorlessen_US
dc.subjectPMSMen_US
dc.title電流源供電之永磁同步馬達無位置感測控制zh_TW
dc.titleCSI-Fed Position Sensorless for PMSMen_US
dc.typeThesisen_US
dc.contributor.department電控工程研究所zh_TW
顯示於類別:畢業論文