完整後設資料紀錄
DC 欄位語言
dc.contributor.author邱子庭en_US
dc.contributor.authorChiu, Tzu-Tingen_US
dc.contributor.author施閔雄en_US
dc.contributor.authorShih, Min-Hsiungen_US
dc.date.accessioned2014-12-12T01:49:45Z-
dc.date.available2014-12-12T01:49:45Z-
dc.date.issued2010en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#GT079824513en_US
dc.identifier.urihttp://hdl.handle.net/11536/47539-
dc.description.abstract近年來,光子晶體半導體雷射被認為是應用在發展光積體電路很重要的元件之一。光子晶體雷射的體積很小(∼μm),而且光子晶體雷射波段可藉由結構參數改變而變化。然而一旦結構製作完成,雷射光波長便難以改變。另一方面,以軟性有機材料製作的光學元件有比較高的應用性,而且成本也較低。在本研究中,我們結合這兩項優點,製作光子晶體能帶邊緣型雷射在軟性基板上,分析雷射光學特性和彎曲曲率的關係。並藉由模擬和實驗結果的比較,我們可以推估彎曲程度造成光子晶體結構發生的變化。zh_TW
dc.description.abstractIn recent years, the photonic crystal lasers have been regarded as one of the most important devices applied in the photonic integrated circuit. The photonic crystal lasers have advantages such as small size(∼μm)and geometry-tunable wavelength property. However, once the laser structure is formed, the lasing wavelength would hard to be altered. On the other hand, the organic or polymer based devices have advantages such as application flexibility and low cost. In this thesis, we fabricate the photonic crystal band-edge lasers on a flexible PDMS substrate. We characterize the relationship between the optical properties and the bending curvature. Compared with the measurement result and the simulation, we can estimate the possible geometry distortions when the structure is bent.en_US
dc.language.isoen_USen_US
dc.subject光子晶體zh_TW
dc.subject半導體雷射zh_TW
dc.subject可撓式元件zh_TW
dc.subjectPhotonic crystalen_US
dc.subjectSemiconductor laseren_US
dc.subjectFlexible deviceen_US
dc.title可撓式光子晶體能帶邊緣型雷射製作及特性分析zh_TW
dc.titleFabrication and Characterization of the Photonic Crystal Band-edge Laser on a PDMS Substrateen_US
dc.typeThesisen_US
dc.contributor.department光電工程學系zh_TW
顯示於類別:畢業論文


文件中的檔案:

  1. 451301.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。