Excellent combination of strength and ductility in an Fe-9Al-28Mn-1.8C alloy

標題:	Excellent combination of strength and ductility in an Fe-9Al-28Mn-1.8C alloy
作者:	Chang, K. M. Chao, C. G. Liu, T. F. 材料科學與工程學系 Department of Materials Science and Engineering
關鍵字:	Spinodal decomposition;Carbides;Microstructure;Mechanical properties;FeAlMnC alloy
公開日期:	1-七月-2010
摘要:	An optimal aging at 450 degrees C resulting in the subject alloy possessing a high yield strength of 1383 MPa with 32.5% elongation. With almost equivalent elongation, the yield strength was about 28% higher than that of FeAlMnC (C <= 1.3 wt.%) alloys after solution heat-treatment or controlled-rolling followed by optimal aging. Additionally, due to pre-existing fine (Fe,Mn)(3)AlC carbides in as-quenched alloy, the aging time required for attaining the optimal combination of strength and ductility was much less than that for FeAlMnC (C <= 1.3 wt.%) alloys. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
URI:	http://dx.doi.org/10.1016/j.scriptamat.2010.03.038 http://hdl.handle.net/11536/5159
ISSN:	1359-6462
DOI:	10.1016/j.scriptamat.2010.03.038
期刊:	SCRIPTA MATERIALIA
Volume:	63
Issue:	2
起始頁:	162
結束頁:	165
顯示於類別：	期刊論文

文件中的檔案：

若為 zip 檔案，請下載檔案解壓縮後，用瀏覽器開啟資料夾中的 index.html 瀏覽全文。