A NAND flash memory controller for SD/MMC flash memory card

檔案

日期

2007-02-01

期刊名稱

IEEE TRANSACTIONS ON MAGNETICS

卷期與頁次

第 43 卷第 2 期,頁 933–935

ISSN

0018-9464

語言

英文

摘要

In this paper, a novel NAND flash memory controller was designed. A t-EC w-bit parallel Bose-Chaudhuri-Hocquengham (BCH) error-correction code (ECC) was designed for correcting the random bit errors of the flash memory chip, which is suitable for the randomly bit errors property and parallel I/O interface of the NAND-type flash memory. A code-banking mechanism was designed for the tradeoffs between the controller cost and the in-system programmability (ISP) support. With the ISP functionality and the Flash parameters programmed in the reserved area of the flash memory chip during the card production stage, the function for supporting various kinds of NAND flash memory could be provided by a single controller. In addition, built-in defect management and wear-leveling algorithm enhanced the product life cycle and reliability. Dual channel accessing of the Flash memory provided the good performance in data transfer rate. With respect to the proposed controller architecture, a real secure digital card (SD)/multimedia card (MMC) flash memory card controller chip was designed and implemented with UMC 0.18 mu m CMOS process. Experimental results show the designed circuit can fully comply with the system specifications and shows the good performances.

所屬典藏

會議論文
顯示完整詮釋資料 統計資料

引用此條目

Lin, C.-S., & Dung, L.-R. (2007). A NAND flash memory controller for SD/MMC flash memory card. IEEE TRANSACTIONS ON MAGNETICS, 43(2), 933–935. https://doi.org/10.1109/TMAG.2006.888520

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/5323