標題: 以多晶矽為犧牲層之懸浮浮板結構之製作
Formation of Special Floating Membrane Structure with Sacrificial Polysilicon
作者: 謝東衡
Shie, Tung-Heng
謝正雄
Shie, Jin-Shown
光電工程學系
關鍵字: 多晶矽;懸浮浮板結構
公開日期: 1996
摘要: 本論文旨在運用犧牲層之技術製作微感測元件所需之懸浮薄板。研究的方法是利用多晶矽當犧牲層,氮化矽、富矽氮化矽、ONO或 NON 之三明治結構等當浮板結構層,以期製作微感測器所需之大型薄板。文中並探討犧牲層製作之技術及懸浮薄板的應力問題,以及因落差所造成的階梯涵蓋面問題。對未來,如何製作更大型薄板及熱阻型微感測器亦做概略性描述。
This thesis presents that the technology of sacrificial layer was used by the fabrication of suspended membrane for microsensor. We used polysilicon as a sacrificial layer, Si3N4, Si-rich nitride, ONO or NON of sandwish structure as a structural layer to fabricate the large membrane for microsensor. We also discuss the technology of sacrificial layer and the problem caused by thin film stress and by step coverage. For the future, how to fabricate the microbolometer and the larger membrane for microsensor is outlined.
URI: http://140.113.39.130/cdrfb3/record/nctu/#NT853124020
http://hdl.handle.net/11536/62310
Appears in Collections:Thesis