Full metadata record
DC FieldValueLanguage
dc.contributor.author余志誠en_US
dc.contributor.authorYu, Zhi-Chengen_US
dc.contributor.author邱俊誠en_US
dc.contributor.authorQiu, Zun-Chengen_US
dc.date.accessioned2014-12-12T02:19:47Z-
dc.date.available2014-12-12T02:19:47Z-
dc.date.issued1997en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#NT864591004en_US
dc.identifier.urihttp://hdl.handle.net/11536/63650-
dc.description.abstractThis research describes a MEMS sliding device that can be used for position control of optical devices. This MEMS device consists of actuator, sensor and linear sliding block that are fabricated by using the Multi-User MEMS Processes(MUMPs). Firstly, by using MEMSprocess simulation software, Intellicad, we could analyze the givenfabrication process so that the designed MEMS device canbe successfully manufacture. Secondly, by adapting ANSYS finite element analysissoftware, we are able to analyze the dynamic characteristic of the designed actuator driven by electrical voltage and heat. A build-in sensor based on variable capacitance is also developed to measure the displacement of the traveling slider. Finally, a PC-based feedback control design, which consistsof I/O interface, actuating and sensing circuits, is developed and tried to achieve the goal: position control of a MEMS sliding device.zh_TW
dc.language.isozh_TWen_US
dc.subject電熱式微致動器zh_TW
dc.subject微滑桿致動系統zh_TW
dc.subject位置控制zh_TW
dc.subject電機工程zh_TW
dc.subject控制工程zh_TW
dc.subjectThermal Microactuatorsen_US
dc.subjectMicro Sliding Systemen_US
dc.subjectPosition Controlen_US
dc.subjectELECTRICAL-ENGINEERINGen_US
dc.subjectCONTROL-ENGINEERINGen_US
dc.titleFabrication、Analysis and Research of Three-layer Polysilicon Thermal Microactuators and Micro Sliding Systemzh_TW
dc.typeThesisen_US
dc.contributor.department電控工程研究所zh_TW
Appears in Collections:Thesis