Full metadata record
DC FieldValueLanguage
dc.contributor.author林煜倚en_US
dc.contributor.authorYu-Yi Linen_US
dc.contributor.author吳建興en_US
dc.contributor.authorJiann-Shing Wuen_US
dc.date.accessioned2014-12-12T02:47:08Z-
dc.date.available2014-12-12T02:47:08Z-
dc.date.issued2004en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#GT009225557en_US
dc.identifier.urihttp://hdl.handle.net/11536/76845-
dc.description.abstract本論文之主旨在針對插閂型混合元件,以改變不同的幾何形狀、插閂數量的多寡及相對的排列位置關係,來探討與分析高分子流體於單螺桿押出製程的混合程度。 本文的研究方式為利用有限元素法(Finite Element Method)模擬高分子流體的流動,進行的模擬軟體採用的是ANSYS,藉由從界面面積比(Interfacial Area Ratio)和能量消耗量(Energy Consumption)兩個指標,比較其混合程度與效益,進而達到最佳化設計。zh_TW
dc.description.abstractThis study aims to investigate and analyses the mix level for polymer flow in single screw extrusion process with change the geometry shape, numbers, and relative location of arrangement of pins of the mixing pin elements. This study use the finite element method to simulation polymer flow in the mixing section. The software adopted to simulate is ANSYS. Comparison between mixedness and efficiency by interfacial area ratio and energy consumption. Furthermore, achieve optimal design.en_US
dc.language.isozh_TWen_US
dc.subject分配式zh_TW
dc.subject混合元件zh_TW
dc.subject單螺桿zh_TW
dc.subject最佳化設計zh_TW
dc.subjectDistributiveen_US
dc.subjectMixing Elementen_US
dc.subjectSingle Screwen_US
dc.subjectOptimal Designen_US
dc.title分配式混合元件於單螺桿押出製程之混合分析及最佳化設計zh_TW
dc.titleOptimal Design and Mixing Analyses of Distributive Mixing Elements for the Single Screw Extrusion Processen_US
dc.typeThesisen_US
dc.contributor.department應用化學系碩博士班zh_TW
Appears in Collections:Thesis


Files in This Item:

  1. 555701.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.