分配式混合元件於單螺桿押出製程之混合分析及最佳化設計

完整後設資料紀錄

DC 欄位	值	語言
dc.contributor.author	林煜倚	en_US
dc.contributor.author	Yu-Yi Lin	en_US
dc.contributor.author	吳建興	en_US
dc.contributor.author	Jiann-Shing Wu	en_US
dc.date.accessioned	2014-12-12T02:47:08Z	-
dc.date.available	2014-12-12T02:47:08Z	-
dc.date.issued	2004	en_US
dc.identifier.uri	http://140.113.39.130/cdrfb3/record/nctu/#GT009225557	en_US
dc.identifier.uri	http://hdl.handle.net/11536/76845	-
dc.description.abstract	本論文之主旨在針對插閂型混合元件，以改變不同的幾何形狀、插閂數量的多寡及相對的排列位置關係，來探討與分析高分子流體於單螺桿押出製程的混合程度。本文的研究方式為利用有限元素法(Finite Element Method)模擬高分子流體的流動，進行的模擬軟體採用的是ANSYS，藉由從界面面積比(Interfacial Area Ratio)和能量消耗量(Energy Consumption)兩個指標，比較其混合程度與效益，進而達到最佳化設計。	zh_TW
dc.description.abstract	This study aims to investigate and analyses the mix level for polymer flow in single screw extrusion process with change the geometry shape, numbers, and relative location of arrangement of pins of the mixing pin elements. This study use the finite element method to simulation polymer flow in the mixing section. The software adopted to simulate is ANSYS. Comparison between mixedness and efficiency by interfacial area ratio and energy consumption. Furthermore, achieve optimal design.	en_US
dc.language.iso	zh_TW	en_US
dc.subject	分配式	zh_TW
dc.subject	混合元件	zh_TW
dc.subject	單螺桿	zh_TW
dc.subject	最佳化設計	zh_TW
dc.subject	Distributive	en_US
dc.subject	Mixing Element	en_US
dc.subject	Single Screw	en_US
dc.subject	Optimal Design	en_US
dc.title	分配式混合元件於單螺桿押出製程之混合分析及最佳化設計	zh_TW
dc.title	Optimal Design and Mixing Analyses of Distributive Mixing Elements for the Single Screw Extrusion Process	en_US
dc.type	Thesis	en_US
dc.contributor.department	應用化學系碩博士班	zh_TW
顯示於類別：	畢業論文

文件中的檔案：

555701.pdf

若為 zip 檔案，請下載檔案解壓縮後，用瀏覽器開啟資料夾中的 index.html 瀏覽全文。