完整後設資料紀錄
DC 欄位語言
dc.contributor.authorZhong, Z-Cen_US
dc.contributor.authorChen, S-Hen_US
dc.contributor.authorHung, C-Hen_US
dc.date.accessioned2014-12-08T15:10:05Z-
dc.date.available2014-12-08T15:10:05Z-
dc.date.issued2009-02-01en_US
dc.identifier.issn0954-4119en_US
dc.identifier.urihttp://dx.doi.org/10.1243/09544119JEIM476en_US
dc.identifier.urihttp://hdl.handle.net/11536/7691-
dc.description.abstractThis study used finite element (FE) analysis with the load-controlled method (LCM) and the displacement-controlled method (DCM) to examine motion differences at the implant level and adjacent levels between fusion and non-fusion implants. A validated three-dimensional intact (INT) L1-L5 FE model was used. At the L3-L4 level, the INT model was modified to surgery models, including the artificial disc replacement (ADR) of ProDisc II, and the anterior lumbar interbody fusion (ALIF) cage with pedicle screw fixation. The LCM imposed 10 N m moments of four physiological motions and a 150 N preload at the top of LI. The DCM process was in accordance with the hybrid testing protocol. The average percentage changes in the range of motion (ROM) for whole non-operated levels were used to predict adjacent level effects (ALE%). At the implant level, the ALIF model showed similar stability with both control methods. The ADR model using the LCM had a higher ROM than the model using the DCM, especially in extension and torsion. At the adjacent levels, the ALIF model increased ALE% (at least 17 per cent) using the DCM compared with the LCM. The ADR model had an ALE% close to that of the INT model, using the LCM (average within 6 per cent), while the ALE% decreased when using the DCM. The study suggests that both control methods can be adopted to predict the fusion model at the implant level, and similar stabilization characteristics can be found. The LCM will emphasize the effects of the non-fusion implants. The DCM was more clinically relevant in evaluating the fusion model at the adjacent levels. In conclusion, both the LCM and the DCM should be considered in numerical simulations to obtain more realistic data in spinal implant biomechanics.en_US
dc.language.isoen_USen_US
dc.subjectload-controlled methoden_US
dc.subjectdisplacement-controlled methoden_US
dc.subjecthybrid approachen_US
dc.subjectfinite element analysisen_US
dc.subjectadjacent segment effecten_US
dc.subjectartificial discen_US
dc.subjectfusionen_US
dc.titleLoad- and displacement-controlled finite element analyses on fusion and non-fusion spinal implantsen_US
dc.typeArticleen_US
dc.identifier.doi10.1243/09544119JEIM476en_US
dc.identifier.journalPROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINEen_US
dc.citation.volume223en_US
dc.citation.issueH2en_US
dc.citation.spage143en_US
dc.citation.epage157en_US
dc.contributor.department機械工程學系zh_TW
dc.contributor.departmentDepartment of Mechanical Engineeringen_US
dc.identifier.wosnumberWOS:000263767400002-
dc.citation.woscount18-
顯示於類別:期刊論文


文件中的檔案:

  1. 000263767400002.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。