標題: 高介電常數材料二氧化鉿於金屬-絕緣體-金屬電容之研究
Investigation of High-K Material HfO2 on Metal-Insulator-Metal Capacitor
作者: 許修豪
Shiou-Hau Hsu
羅正忠
Jen-Chung Lou
電子研究所
關鍵字: 二氧化鉿;金屬-絕緣體-金屬;高介電常數材料;HfO2;MIM;High-K Material
公開日期: 2005
摘要: 摘 要 對於金絕金電容而言,尺寸的微縮可以減少晶片的大小和類比與射頻電路的成本。為了達到高電容密度與低漏電流密度的目標,高介電係數材料的需求是必要的。金絕金電容是利用濺鍍二氧化鉿和鉭組成。使用二氧化鉿當高介電係數材料的金絕金電容,電容密度高達25.67fF/um2 以及漏電流密度大約3.5×10-7 A/cm2。 之後,我們討論沉積後退火對於金絕金電容的影響。發現到元件的漏電流密度在做完通氧氣時沉積後退火會變小,電容密度則是再作完通氮氣時沉積後退火會變大的結果。另外,我們還討論表面電漿處理對金絕金電容的影響。發現到元件的電容電壓係數會變小的特性。
Abstract Continuous down-scaling of the size of metal–insulator–metal (MIM) capacitors is required to reduce chip size and the cost of analog and RF ICs. The use of a high-k dielectric is the only way to achieve this goal, since decreasing the dielectric thickness to achieve high capacitance density degrades the leakage current. Metal-insulator- metal (MIM) capacitors are fabricated using sputtered HfO2 with Ta for top and bottom electrodes. A very high density of 25.67fF/um2 has been measured in metal–insulator–metal (MIM) capacitors which use high-k HfO2 the dielectric. The characteristics the MIM capacitors show the leakage current densities around 3.5×10-7 A/ cm2
URI: http://140.113.39.130/cdrfb3/record/nctu/#GT009311545
http://hdl.handle.net/11536/78016
Appears in Collections:Thesis


Files in This Item:

  1. 154501.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.