完整後設資料紀錄
DC 欄位語言
dc.contributor.authorWang, Bau-Mingen_US
dc.contributor.authorWu, YewChung Sermonen_US
dc.date.accessioned2014-12-08T15:10:21Z-
dc.date.available2014-12-08T15:10:21Z-
dc.date.issued2009en_US
dc.identifier.issn1099-0062en_US
dc.identifier.urihttp://hdl.handle.net/11536/7911-
dc.identifier.urihttp://dx.doi.org/10.1149/1.3035974en_US
dc.description.abstractNickel contamination inside nickel-metal-induced lateral crystallization (NILC) polycrystalline silicon poses a problem in the fabrication of high-performance thin-film transistors. In this study, amorphous Si (alpha-Si) and chemical oxide (chem-SiO(2)) films were employed to reduce the impurity of Ni-metal within the NILC film. The top 100 nm thick alpha-Si layer served as a gettering layer, while the middle 5 nm thick chem-SiO(2) layer served as an etching stop layer. It was found that nickel contamination was greatly reduced after annealing at 550 degrees C for only 12 h.en_US
dc.language.isoen_USen_US
dc.subjectannealingen_US
dc.subjectcontaminationen_US
dc.subjectetchingen_US
dc.subjectgettersen_US
dc.subjectnickelen_US
dc.subjectsiliconen_US
dc.subjectsilicon compoundsen_US
dc.subjectthin film transistorsen_US
dc.titleGettering of Ni from Nickel-Induced Lateral Crystallization Silicon Using Amorphous Silicon and Chemical Oxideen_US
dc.typeArticleen_US
dc.identifier.doi10.1149/1.3035974en_US
dc.identifier.journalELECTROCHEMICAL AND SOLID STATE LETTERSen_US
dc.citation.volume12en_US
dc.citation.issue2en_US
dc.citation.spageJ14en_US
dc.citation.epageJ16en_US
dc.contributor.department材料科學與工程學系zh_TW
dc.contributor.departmentDepartment of Materials Science and Engineeringen_US
dc.identifier.wosnumberWOS:000261698500020-
dc.citation.woscount8-
顯示於類別:期刊論文