High performance non-alloyed pseudomorphic high electron mobility transistors

檔案

日期

1996-07-01

類型

期刊名稱

MATERIALS CHEMISTRY AND PHYSICS

卷期與頁次

第 45 卷第 1 期,頁 92–96

ISSN

0254-0584

語言

英文

摘要

We have studied the InAs/GaAs strained layer superlattice (SLS) structures as non-alloyed contacts applied to pseudomorphic high electron mobility transistors (PHEMTs) grown by the molecular beam epitaxy (MBE) system. Transmission line measurements with four point configurations showed that specific contact resistances between 6.6 x 10(-7) and 2.6 x 10(-6) Omega cm(2) were obtained for the as-grown devices, with a linear correlation coefficient of 0.997. D.c. measurements of the as-grown PHEMT with 1 mu m gate showed a transconductance of 240 ms mm(-1). Microwave measurements on the same device showed a cut-off frequency of 19 GHz and a maximum power gain frequency of 42 GHz. These results are comparable with those of devices with the conventional contact scheme. Meanwhile, since the non-alloying process maintains excellent surface morphology and sharp metal pad edges, AuGeNi type metals can be used in small dimension devices. In contrast, the conventionally alloyed devices showed rough surface morphology and zigzag edges, which may affect device processing and limit the usefulness of AuGeNi metal as the ohmic contact in small dimension devices.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Peng, C., Lan, W., Tu, S., Yang, S., Chen, S., & Lin, C. (1996). High performance non-alloyed pseudomorphic high electron mobility transistors. MATERIALS CHEMISTRY AND PHYSICS, 45(1), 92–96. https://doi.org/10.1016/0254-0584(96)80056-3

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/1184