完整後設資料紀錄
DC 欄位語言
dc.contributor.authorLin, Bor-Shyhen_US
dc.contributor.authorHuang, Cheng-Yangen_US
dc.contributor.authorChen, Chien-Yueen_US
dc.contributor.authorLin, Jiun-Hungen_US
dc.date.accessioned2016-03-28T00:04:26Z-
dc.date.available2016-03-28T00:04:26Z-
dc.date.issued2016-01-01en_US
dc.identifier.issn0034-6748en_US
dc.identifier.urihttp://dx.doi.org/10.1063/1.4940237en_US
dc.identifier.urihttp://hdl.handle.net/11536/129686-
dc.description.abstractA pulse oximeter is a common medical instrument used for noninvasively monitoring arterial oxygen saturation (SpO(2)). Currently, the fingertip-type pulse oximeter is the prevalent type of pulse oximeter used. However, it is inconvenient for long-term monitoring, such as that under motion. In this study, a wearable and wireless finger base-type pulse oximeter was designed and implemented using the tissue optical simulation technique and the Monte Carlo method. The results revealed that a design involving placing the light source at 135 degrees-165 degrees and placing the detector at 75 degrees-90 degrees or 90 degrees-105 degrees yields the optimal conditions for measuring SpO(2). Finally, the wearable and wireless finger base-type pulse oximeter was implemented and compared with the commercial fingertip-type pulse oximeter. The experimental results showed that the proposed optimal finger base-type pulse oximeter design can facilitate precise SpO(2) measurement. (C) 2016 AIP Publishing LLC.en_US
dc.language.isoen_USen_US
dc.titleDesign of a finger base-type pulse oximeteren_US
dc.typeArticleen_US
dc.identifier.doi10.1063/1.4940237en_US
dc.identifier.journalREVIEW OF SCIENTIFIC INSTRUMENTSen_US
dc.citation.volume87en_US
dc.contributor.department影像與生醫光電研究所zh_TW
dc.contributor.departmentInstitute of Imaging and Biomedical Photonicsen_US
dc.identifier.wosnumberWOS:000369430900010en_US
dc.citation.woscount0en_US
顯示於類別:期刊論文