標題: Performance comparison of p-side-up thin-film AlGaInP light emitting diodes with aluminum-doped zinc oxide and indium tin oxide transparent conductive layers
作者: Tseng, Ming-Chun
Wuu, Dong-Sing
Chen, Chi-Lu
Lee, Hsin-Ying
Lin, Yu-Chang
Horng, Ray-Hua
電子工程學系及電子研究所
Department of Electronics Engineering and Institute of Electronics
公開日期: 1-四月-2016
摘要: Transparent conductive layers (TCLs) deposited on a GaP window layer were used to fabricate high-brightness p-side-up thin-film AlGaInP light-emitting diodes (LEDs) by the twice wafer-transfer technique. Indium tin oxide (ITO) and aluminum-doped zinc oxide (AZO) were used as TCLs for comparison. The TCLs improved droop of external quantum efficiencies (EQE) of LEDs and junction temperature, which result in increasing the light output power and thermal stability of the LEDs. The droop efficiency of Ref-LED, ITO-LED and AZO-LED were 64%, 27% and 15%, respectively. The junction temperature of ITO-LED and AZO-LED reduced to 49.3 and 39.6 degrees C at an injection current of 700 mA compared with that (80.8 degrees C) of Ref-LED. The LEDs with AZO layers exhibited the most excellent LED performance. The emission wavelength shifts of LEDs without a TCL, with an ITO layer, and with an AZO layer were 17, 8, and 3 nm, respectively, when the injection current was increased from 20 to 1000 mA. The above results are promising for the development of AZO thin films to replace ITO thin films for AlGaInP LED applications. (C) 2016 Optical Society of America
URI: http://dx.doi.org/10.1364/OME.6.001349
http://hdl.handle.net/11536/133427
ISSN: 2159-3930
DOI: 10.1364/OME.6.001349
期刊: OPTICAL MATERIALS EXPRESS
Volume: 6
Issue: 4
起始頁: 1349
結束頁: 1357
顯示於類別:期刊論文


文件中的檔案:

  1. a71cd72b7cdf77eeb557fa096cdcdfb7.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。