標題: A novel method for net-shape forming of hypereutectic Al-Si alloys by thixocasting with powder preforms
作者: Chen, CM
Yang, CC
Chao, CG
材料科學與工程學系
Department of Materials Science and Engineering
關鍵字: net-shape forming of hypereutectic Al-Si alloy;semi-solid metal forming;thixocasting;powder preform
公開日期: 25-Aug-2005
摘要: This work presents a novel and feasible method for net-shape forming of hypereutectic A1-Si alloy parts. This method, briefly termed as powder thixocasting in this paper, combines the techniques of thixocasting and conventional powder metallurgy. Consolidated preforms made of gas-atomized and pre-alloyed A1-25Si-2.5Cu-1Mg-0.5Mn powder were used as the feedstock for thixocasting. The alloy powder was preheated under protection of argon atmosphere and then was compacted to form powder preforms. The powder preforms were quickly heated into semi-solid state by induction coils and were immediately thixocast using a die-casting machine. A die with a center gate, a long runner and plate-shaped cavities was designed to examine the feasibility of this process. Results demonstrated that the powder preforms exhibits very good formability by this unique process. The powder thixocast products have satisfied strength and substantial structure with uniform distribution of fine Si particles, while the processing temperature is suitably controlled. This novel process was also successfully used to fabricate compressor scrolls for demonstration. (c) 2004 Elsevier B.V. All rights reserved.
URI: http://dx.doi.org/10.1016/j.jmatprotec.2004.10.001
http://hdl.handle.net/11536/13389
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2004.10.001
期刊: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Volume: 167
Issue: 1
起始頁: 103
結束頁: 109
Appears in Collections:Articles


Files in This Item:

  1. 000232013800012.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.