標題: | Selection of the GTAW-flux process parameters on type 310 stainless steel via a Taguchi-Neural approach |
作者: | Lin, Hsuan-Liang Chou, Chang-Pin Chen, Ming-Song 機械工程學系 Department of Mechanical Engineering |
關鍵字: | GTAW;activating flux;310 stainless steel;Taguchi method;neural networks |
公開日期: | 2008 |
摘要: | In order to achieve single pass welds without edge preparation, instead of multipass procedures, one of the most notable techniques is to use activating flux with GTA welding (GTAW-flux) process. In autogenous GTA welding mixed fluxes (oxide SiO2 and Cr2O3), were applied oil the weld area of type 3 10 stainless steel through a layer of the flux to produce a bead-on-plate weld. Many parameters affect the GTAW-flux process quality. The Taguchi method can improve oil the disadvantages of full factorial design. However, in practice, it has certain limitations. In this work, a Taguchi-Neural approach (Combine Taguchi method and a neural network) was used to select the GTAW-flux process parameters. The experimental procedure of GTAW-flux process, via the proposed approach produced full penetration of the weld root in 8 mm thick type 3 10 stainless steel with single pass welds. |
URI: | http://hdl.handle.net/11536/135644 |
ISSN: | 0255-5476 |
期刊: | ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY |
Volume: | 580-582 |
起始頁: | 347 |
結束頁: | + |
顯示於類別: | 會議論文 |