A study on the optomechanical tolerance model for lens assembly

檔案

日期

2007-01-01

期刊名稱

NEW DEVELOPMENTS IN OPTOMECHANICS

卷期與頁次

第 6665 卷

ISSN

0277-786X

ISBN

978-0-8194-6813-0

語言

英文

摘要

Optomechanics is defined as the science or engineering of maintaining the proper shapes and positions of the functional elements in an optical system. At the optomechanical interface, manufacturing tolerances affect the shape and position of the surface in a lens system. Even very small variations will cause extra aberrations which degrade the optical performance of a lens system. The traditional approach to the optomechanical tolerance design is a top-down process. The optical designers typically designate the critical to quality parameters, such as tolerances of tilts, decenters, and locations of optical elements. A significant drawback of this top-down process is that the tolerances determined by optical designers do not take the real manufacturing and assembly process into consideration. As a result, some tolerances are too tight for the manufacturing, and the yield rate of the production is difficult to improve. The objective of this study is to develop a surface based optomechanical tolerance model that calculates the variation of the critical to quality parameters for a lens system. The distribution of these parameters can be treated as inputs to the optical design. Therefore, the optical performance will be predictable than the top-down approach, and the manufacturability of the optical system can be improved.

所屬典藏

會議論文
顯示完整詮釋資料 統計資料

引用此條目

Cheng, C.-C., Lin, T.-Y., & Chen, R.-H. (2007). A study on the optomechanical tolerance model for lens assembly. NEW DEVELOPMENTS IN OPTOMECHANICS, 6665, 0. https://doi.org/10.1117/12.732241

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/146666