標題: | Optimization of weld bead geometry in the activated GMA welding process via a grey-based Taguchi method |
作者: | Lin, Hsuan-Liang Yan, Jia-Ching 機械工程學系 Department of Mechanical Engineering |
關鍵字: | Activating flux;Aluminum alloy;GMA welding;Grey relational analysis;Taguchi method |
公開日期: | 1-八月-2014 |
摘要: | We optimized the weld bead geometry of 6061 aluminum alloy welds pre-coated with activating flux before gas metal arc (GMA) welding. In this activated GMA welding process, there were five single component fluxes used in the initial experiment to evaluate the penetration capability of bead-on-plate GMA welds. Based on the higher penetration of weld bead, two single component fluxes were selected to create mixed component flux in next stage. The grey-based Taguchi method was employed to obtain the optimal welding parameters that were considered with multiple quality characteristics such as penetration, depth-to-width ratio (DWR) and fusion area of GMA welds. The experimental procedure of the proposed approach not only increases penetration of 6061 aluminum alloy welds, but also improves the DWR and fusion area of GMA butt-joint welds simultaneously. |
URI: | http://dx.doi.org/10.1007/s12206-014-0735-9 http://hdl.handle.net/11536/147796 |
ISSN: | 1738-494X |
DOI: | 10.1007/s12206-014-0735-9 |
期刊: | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
Volume: | 28 |
起始頁: | 3249 |
結束頁: | 3254 |
顯示於類別: | 期刊論文 |