標題: Accurate and Fast On-Wafer Test Circuitry for Device Array Characterization in Wafer Acceptance Test
作者: Hong, Hao-Chiao
Lin, Long-Yi
電機工程學系
Department of Electrical and Computer Engineering
關鍵字: Wafer acceptance test;on-wafer test circuitry;device array characterization;process variation
公開日期: 1-Sep-2019
摘要: This paper proposes an on-wafer test circuitry for rapidly and accurately characterizing the devices under tests (DUTs) of the DUT array in the wafer acceptance test (WAT) to qualify wafers faster and more reliably. The proposed test cell simply comprises a DUT and a selection MOSFET operating in the saturation region as a current buffer when being activated. An analog feedback loop with a replica-biasing circuit tracks the selected DUT's output current and automatically biases the selection MOSFET's gate so as to accurately duplicate the desired setup voltage at the selected DUT's output node. Comparing with conventional designs using the Kelvin sensing scheme to address the switches' IR drops, the proposed design has less transistor counts, shorter test time, and no risk of forward-bias p-n junctions. Consequently, it achieves a lower test cost and a higher test throughput. The whole proposed test circuitry including 1024 NMOS DUTs has been designed and fabricated in 90-nm CMOS. The active area is only 60 mu m by 800 mu m which is small enough to be placed into the scribe line on wafers as conventional WAT circuitry is. Measurement results demonstrate the proposed design's efficiency and capability of revealing local process variations.
URI: http://dx.doi.org/10.1109/TCSI.2019.2924251
http://hdl.handle.net/11536/152869
ISSN: 1549-8328
DOI: 10.1109/TCSI.2019.2924251
期刊: IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS
Volume: 66
Issue: 9
起始頁: 3467
結束頁: 3479
Appears in Collections:Articles