Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Gan, Kai-Jhih | en_US |
dc.contributor.author | Liu, Po-Tsun | en_US |
dc.contributor.author | Ruan, Dun-Bao | en_US |
dc.contributor.author | Hsu, Chih-Chieh | en_US |
dc.contributor.author | Chiu, Yu-Chuan | en_US |
dc.contributor.author | Sze, Simon M. | en_US |
dc.date.accessioned | 2020-07-01T05:21:16Z | - |
dc.date.available | 2020-07-01T05:21:16Z | - |
dc.date.issued | 1970-01-01 | en_US |
dc.identifier.issn | 0361-5235 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1007/s11664-020-08177-9 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/154346 | - |
dc.description.abstract | The effect of annealing on the performance of conductive-bridging random-access memory (CBRAM) with an amorphous gallium oxide (a-Ga2O3) switching layer has been studied. After annealing at 200 degrees C in N-2, a significant improvement of the bipolar resistive switching characteristics was observed. The a-Ga2O3 CBRAM showed good memory performance, with high switching endurance (up to 7.5 x 10(2) cycles) and high thermal stability. The resistive switching stability and electrical uniformity were also obviously improved. The memory window remained above 10(5) over 7.5 x 10(2) endurance cycles at 85 degrees C. Material characterization by x-ray photoelectron spectroscopy suggested that the improved uniformity of the resistive switching in the N-2-annealed Ga2O3 films may result from a higher density of oxygen vacancies. These results indicate great potential for such devices in future high-density nonvolatile memory applications. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | Gallium oxide (Ga2O3) | en_US |
dc.subject | oxygen vacancies | en_US |
dc.subject | conductive-bridge random-access memory (CBRAM) | en_US |
dc.subject | physical vapor deposition | en_US |
dc.title | Effect of Annealing Treatment on Performance of Ga2O3 Conductive-Bridging Random-Access Memory | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1007/s11664-020-08177-9 | en_US |
dc.identifier.journal | JOURNAL OF ELECTRONIC MATERIALS | en_US |
dc.citation.spage | 0 | en_US |
dc.citation.epage | 0 | en_US |
dc.contributor.department | 電子工程學系及電子研究所 | zh_TW |
dc.contributor.department | 光電工程學系 | zh_TW |
dc.contributor.department | 光電工程研究所 | zh_TW |
dc.contributor.department | Department of Electronics Engineering and Institute of Electronics | en_US |
dc.contributor.department | Department of Photonics | en_US |
dc.contributor.department | Institute of EO Enginerring | en_US |
dc.identifier.wosnumber | WOS:000532125800002 | en_US |
dc.citation.woscount | 0 | en_US |
Appears in Collections: | Articles |