完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Fang, Yu-Siang | en_US |
dc.contributor.author | Thi Hien Do | en_US |
dc.contributor.author | Chiu, Kun-An | en_US |
dc.contributor.author | Chen, Wei-Chun | en_US |
dc.contributor.author | Chang, Li | en_US |
dc.date.accessioned | 2020-10-05T02:01:03Z | - |
dc.date.available | 2020-10-05T02:01:03Z | - |
dc.date.issued | 2020-07-01 | en_US |
dc.identifier.uri | http://dx.doi.org/10.3390/coatings10070647 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/155095 | - |
dc.description.abstract | Epitaxial (100) TiC film deposition on Si (100) substrate by direct current magnetron reactive sputtering of a metallic Ti target with 3%-6% CH4 in Ar gas was investigated. X-ray diffraction and cross-sectional scanning transmission electron microscopy (STEM) reveal that epitaxial cubic TiC can be grown on the Si substrate by domain matching epitaxy in 5/4 ratio with the epitaxial relationship of TiC (100)[0 (1) over bar1] // Si (100)[0 (1) over bar 1]. For sputtering with 3% and 4% CH4, the deposited films are found to consist of both TiC and metallic Ti phases. Increasing the CH4 flow ratio to 5% results in a deposited film completely consisting of TiC without metallic Ti phase. The crystallinity of the deposited TiC is also improved with increasing the CH4 ratio to 5%. X-ray photoelectron spectroscopy shows that the [C]/[Ti] atomic ratio in TiC is nearly close to 1 for growth with 5% CH4 flow ratio and above. The measured electrical resistivities of the deposited films also increase from 41 to 153 mu omega center dot cm with increasing the CH4 ratio from 3% to 6%. With film growth beyond 50 nm thickness, it is shown that some disoriented TiC grains are formed. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | TiC | en_US |
dc.subject | Si substrate | en_US |
dc.subject | epitaxial growth | en_US |
dc.subject | reactive magnetron sputtering | en_US |
dc.title | Reactive Sputtering Deposition of Epitaxial TiC Film on Si (100) Substrate | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.3390/coatings10070647 | en_US |
dc.identifier.journal | COATINGS | en_US |
dc.citation.volume | 10 | en_US |
dc.citation.issue | 7 | en_US |
dc.citation.spage | 0 | en_US |
dc.citation.epage | 0 | en_US |
dc.contributor.department | 材料科學與工程學系 | zh_TW |
dc.contributor.department | Department of Materials Science and Engineering | en_US |
dc.identifier.wosnumber | WOS:000556996400001 | en_US |
dc.citation.woscount | 0 | en_US |
顯示於類別: | 期刊論文 |