Reduction of efficiency droop in InGaN-Based UV Light-Emitting Diodes with InAlGaN Barrier

檔案

日期

2012

期刊名稱

GALLIUM NITRIDE MATERIALS AND DEVICES VII

卷期與頁次

第 8262 卷

ISSN

0277-786X

ISBN

978-0-8194-8905-0

語言

英文

摘要

In this study, we fabricated and compared the performance of LEDs of InGaN-based UV MQWs active region with ternary AlGaN and quaternary InAlGaN barrier layers. HRXRD and TEM measurements show the two barriers are consistent with the lattice, and smooth morphology of quaternary InAlGaN layer can be observed in AFM. The electroluminescence results indicate that the light performance of the InGaN-based UV LEDs can be enhanced effectively when the conventional LT AlGaN barrier layers are replaced by the InAlGaN barrier layers. Furthermore, simulation results show that InGaN-based UV LEDs with quaternary InAlGaN barrier exhibit higher radiative recombination rate about 62% and low efficiency droop about 13% at a high injection current. We attribute this change to a drastic improvement from increasing of carrier concentration and redistribution of carriers, because of reduction of scatterings due to better morphology in the transverse carrier transport through the InGaN/InAlGaN MQWs.

所屬典藏

會議論文
顯示完整詮釋資料 統計資料

引用此條目

Chiu, C.-H., Tu, P.-M., Chang, J.-R., Chang, W.-T., Kuo, H.-C., & Chang, C.-Y. (2012). Reduction of efficiency droop in InGaN-Based UV Light-Emitting Diodes with InAlGaN Barrier. GALLIUM NITRIDE MATERIALS AND DEVICES VII, 8262. https://ir.lib.nycu.edu.tw/handle/11536/15891

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/15891