Fabrication of thin-film transistors on plastic substrates by spin etching and device transfer process
檔案
- 000221558600045.pdf (729.2 KB, Adobe PDF)
日期
2004
類型
系所
期刊名稱
DEVICE AND PROCESS TECHNOLOGIES FOR MEMS, MICROELECTRONICS, AND PHOTONICS III
卷期與頁次
頁 376–383
ISBN
0-8194-5169-X
語言
英文
摘要
This work presents a novel method to transfer thin-film transistors from a Si wafer to another flexible plastic substrate. First, high-performance poly-Si TFTs were fabricated on 1-mum thick SiO2 of a Si wafer and then adhered to a flexible plastic substrate by the optical adhesive. Next, the spin-etching process was utilized to remove the backside Si with SiO2 as a stopping layer. We have established a qualitative model to explain the relation between the chemical flow rate/rotation speed to the etching rate and the uniformity of Si removal. The Si etching rate is higher than 200 mum/min while maintaining Si to SiO2 selectivity of 250 under optimized spin-etching parameters. Compared to that before transference, no degradation or yield loss was found due to substrate bonding and Si spin-etching steps. Additionally, extrinsic stress shows little effect to the properties of poly-Si resistors on the flexible plastic substrate.
所屬典藏
會議論文引用此條目
Wang, S., Hsu, C., Yeh, C., & Lou, J. (2004). Fabrication of thin-film transistors on plastic substrates by spin etching and device transfer process. DEVICE AND PROCESS TECHNOLOGIES FOR MEMS, MICROELECTRONICS, AND PHOTONICS III, 376–383. https://doi.org/10.1117/12.522034
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/18248