完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Chiu, Y | en_US |
dc.contributor.author | Wu, M | en_US |
dc.contributor.author | Shieh, HPD | en_US |
dc.contributor.author | Sun, YT | en_US |
dc.contributor.author | Chou, HL | en_US |
dc.contributor.author | Hsu, W | en_US |
dc.date.accessioned | 2014-12-08T15:26:05Z | - |
dc.date.available | 2014-12-08T15:26:05Z | - |
dc.date.issued | 2003 | en_US |
dc.identifier.isbn | 0-8194-4976-8 | en_US |
dc.identifier.issn | 0277-786X | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/18494 | - |
dc.identifier.uri | http://dx.doi.org/10.1117/12.498721 | en_US |
dc.description.abstract | As the recording density of longitudinal magnetic storage increases at a 100% annual growth rate, it will soon approach the superparamagnetic limit where the thermal energy at room temperature starts to induce thermal instability to the grains in the small recorded marks. Thermal magnetic recording schemes, such as those used in magneto-optical recording, help alleviate the problems with the superparamagnetic limit. Recently, a hybrid recording system was proposed where data were recorded thermal magnetically on a magneto-optical disk and read back with a GMR head. In this paper, we propose an integrated planar head that combines an optical fiber lens, a solid immersion lens, a sub wavelength aperture, a micro coil, an air bearing surface, and a GMR head for such a hybrid recording system. Preliminary fabrication and calculation are discussed. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | near-field recording | en_US |
dc.subject | hybrid recording | en_US |
dc.subject | solid immersion lens | en_US |
dc.subject | micro coil | en_US |
dc.subject | fiber lens | en_US |
dc.subject | sub-wavelength aperture | en_US |
dc.subject | air bearing surfaces | en_US |
dc.title | Integrated near-field optical head for hybrid recording | en_US |
dc.type | Proceedings Paper | en_US |
dc.identifier.doi | 10.1117/12.498721 | en_US |
dc.identifier.journal | SMART SENSORS, ACTUATORS, AND MEMS, PTS 1 AND 2 | en_US |
dc.citation.volume | 5116 | en_US |
dc.citation.spage | 205 | en_US |
dc.citation.epage | 211 | en_US |
dc.contributor.department | 電控工程研究所 | zh_TW |
dc.contributor.department | Institute of Electrical and Control Engineering | en_US |
dc.identifier.wosnumber | WOS:000184053200024 | - |
顯示於類別: | 會議論文 |