標題: Development of a new apparatus for ultrasonic vibration-assisted glass hot embossing process
作者: Hung, Jung-Chung
Tsai, Yen-Pin
Hung, Chinghua
機械工程學系
Department of Mechanical Engineering
關鍵字: Ultrasonic vibration;Glass hot embossing
公開日期: 1-一月-2013
摘要: A new apparatus for an ultrasonic vibration-assisted glass hot embossing process has been developed. The upper die constitutes the ultrasonic vibrating device, and a cooler is provided to protect the transducer from the high operating temperatures. An ultrasonic horn originally designed for use at room temperature was modified to ensure correct operation of ultrasonic vibrating device for high temperature use. Because the load cell is located inside a vacuum chamber, the detection of the force applied to the glass during the forming process is not significantly impacted by external forces, and thus, a precise force history of the forming glass can be obtained. Flat hot embossing experiments were performed to investigate the effect of ultrasonic vibration on the amount of force required during forming, and Fresnel structure hot embossing experiments were then conducted to investigate the improvement in molding accuracy gained through ultrasonic vibration. The experimental results are taken to validate the manufacturing potential of the developed apparatus and the improvement in formability achieved by applying ultrasonic vibration. (c) 2012 Elsevier Inc. All rights reserved.
URI: http://dx.doi.org/10.1016/j.precisioneng.2012.06.002
http://hdl.handle.net/11536/20573
ISSN: 0141-6359
DOI: 10.1016/j.precisioneng.2012.06.002
期刊: PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
Volume: 37
Issue: 1
起始頁: 222
結束頁: 227
顯示於類別:期刊論文


文件中的檔案:

  1. 000311260200020.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。