Full metadata record
DC FieldValueLanguage
dc.contributor.authorHuang, J. Y.en_US
dc.contributor.authorHsu, C. W.en_US
dc.contributor.authorShieh, Jia-Minen_US
dc.contributor.authorYu, Peichenen_US
dc.date.accessioned2014-12-08T15:39:40Z-
dc.date.available2014-12-08T15:39:40Z-
dc.date.issued2010en_US
dc.identifier.isbn978-1-4244-5891-2en_US
dc.identifier.issn0160-8371en_US
dc.identifier.urihttp://hdl.handle.net/11536/27087-
dc.description.abstractThis work first theoretically optimize the amorphous (a-Si:H) and the microcrystalline (mu c-Si:H) devices characteristics, and then perform studies for micromorph tandem solar cells. The studies calculated by AMPS-1D show that the TCO work function has obvious influence on the open-circuit voltage. Moreover, the power conversion efficiency of an a-Si:H cell is optimized by changing the absorber's layer thickness and mobility gap. Furthermore, a critical doping concentration of mu c-Si:H films limiting the barrier height of a grain boundary (GB) is observed. After optimizing sub cell mutually, we combine the individual junctions to construct a micromorph cell which has an efficiency of 9.24%.en_US
dc.language.isoen_USen_US
dc.titleDEVICE MODELING OF A MICROMORPH TANDEM SOLAR CELL USING AMPS-1Den_US
dc.typeArticleen_US
dc.identifier.journal35TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCEen_US
dc.contributor.department光電工程學系zh_TW
dc.contributor.departmentDepartment of Photonicsen_US
dc.identifier.wosnumberWOS:000287579501156-
Appears in Collections:Conferences Paper