標題: Optimising the thermoforming process of polymeric foams: an approach by using the Taguchi method and the utility concept
作者: Yang, C
Hung, SW
經營管理研究所
Institute of Business and Management
公開日期: 2004
摘要: The use of the conventional Taguchi method for determining the optimum setting of controllable factors through off-line experiments focuses on products with a single quality characteristic or response. However, most products have several qualitative characteristics or responses of interest. The Taguchi method in itself optimises a single response or performance characteristic, yielding a set of process parameters. This particular setting, however, may not give the desired results for other characteristics of the product. There is a need to obtain a single optimum setting of process parameters that can be used to produce products with optimum or near optimum quality characteristics as a whole. Multi-characteristic response optimisation may be the solution to the above problem. In this report, a case study on thermoforming polypropylene foams, utilising a simplified multi-criterion methodology based on Taguchi's approach and utility concept, is discussed. Key processing factors affecting product quality are identified. It has been shown that the proposed Taguchi approach with the utility concept can provide an appropriate solution to yield a satisfactory product quality for a multi-response process optimisation problem.
URI: http://hdl.handle.net/11536/27216
http://dx.doi.org/10.1007/s00170-003-1591-4
ISSN: 0268-3768
DOI: 10.1007/s00170-003-1591-4
期刊: INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Volume: 24
Issue: 5-6
起始頁: 353
結束頁: 360
Appears in Collections:Articles


Files in This Item:

  1. 000224492200005.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.