Title: Critical spacing between emitter and base in InGaP heterojunction bipolar transistors (HBTs)
Authors: Huang, CE
Lee, CP
Liang, HC
Huang, RT
電子工程學系及電子研究所
Department of Electronics Engineering and Institute of Electronics
Keywords: critical spacing between emitter and base;flicker noise;InGaPHBT;ledge length
Issue Date: 1-Oct-2002
Abstract: In this paper, the influence of the spacing between the emitter and the base on the performance of InGaP heterojunction bipolar transistors (HBT) was experimentally studied. We found that the emitter to base spacing can be reduced to as small as 0.6 mum without causing a significant drop in the current gain. The reduction in emitter-to-base spacing, however, leads to improvement in high-frequency performance and device phase noise. For optimal dc, RF, and low-frequency noise performances, we have determined that a critical spacing of 0.6similar to0.8 mum between the emitter and the base of an InGaP HBT is required.
URI: http://dx.doi.org/10.1109/LED.2002.803758
http://hdl.handle.net/11536/28508
ISSN: 0741-3106
DOI: 10.1109/LED.2002.803758
Journal: IEEE ELECTRON DEVICE LETTERS
Volume: 23
Issue: 10
Begin Page: 576
End Page: 578
Appears in Collections:Articles


Files in This Item:

  1. 000178497900002.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.