完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | LIN, HC | en_US |
dc.contributor.author | LIN, HY | en_US |
dc.contributor.author | CHANG, CY | en_US |
dc.contributor.author | LEI, TF | en_US |
dc.contributor.author | WANG, PJ | en_US |
dc.contributor.author | CHAO, CY | en_US |
dc.date.accessioned | 2014-12-08T15:04:21Z | - |
dc.date.available | 2014-12-08T15:04:21Z | - |
dc.date.issued | 1993-09-06 | en_US |
dc.identifier.issn | 0003-6951 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1063/1.109674 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/2856 | - |
dc.description.abstract | Deposition of undoped polycrystalline-silicon (poly-Si) films on SiO2 using an ultrahigh vacuum chemical vapor deposition system was investigated. Poly-Si films with high crystallinity were obtained at a temperature as low as 525-degrees-C. The layer growth process was found to proceed with an activation energy of 44 +/- 2 kcal/mol, and is dominated by the desorption rate of surface-bonded hydrogen atoms. An incubation time was observed prior to the film deposition. This incubation period increased with decreasing growth temperature, resulting from slower nucleation and growth rates ai lower temperatures. | en_US |
dc.language.iso | en_US | en_US |
dc.title | GROWTH OF UNDOPED POLYCRYSTALLINE SI BY AN ULTRAHIGH-VACUUM CHEMICAL-VAPOR-DEPOSITION SYSTEM | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1063/1.109674 | en_US |
dc.identifier.journal | APPLIED PHYSICS LETTERS | en_US |
dc.citation.volume | 63 | en_US |
dc.citation.issue | 10 | en_US |
dc.citation.spage | 1351 | en_US |
dc.citation.epage | 1353 | en_US |
dc.contributor.department | 機械工程學系 | zh_TW |
dc.contributor.department | 電控工程研究所 | zh_TW |
dc.contributor.department | Department of Mechanical Engineering | en_US |
dc.contributor.department | Institute of Electrical and Control Engineering | en_US |
dc.identifier.wosnumber | WOS:A1993LW18300018 | - |
dc.citation.woscount | 10 | - |
顯示於類別: | 期刊論文 |