Application of inverse problem algorithm for temperature uniformity in rapid thermal processing
檔案
- 000173378900037.pdf (667.9 KB, Adobe PDF)
日期
2002-01-01
類型
系所
期刊名稱
THIN SOLID FILMS
卷期與頁次
第 402 卷第 1-2 期,頁 280–289
ISSN
0040-6090
語言
英文
摘要
This article presents a finite-difference-method formulation to the application of inverse problem algorithms for uniform temperature tracking of several different linear ramp-up rates in rapid thermal processing. A one-dimensional thermal model and temperature-dependent thermal properties of silicon wafers are used. The required incident-heat-flux profiles for temperature uniformity across 300-mm-diameter 0.775-mm-thick silicon wafer were intuitively evaluated. Our numerical results indicate theft temperature non-uniformity occurring during the ramp increase with the ramp-up rate. Although a linear ramp-up rate of 300 degreesC/s was used and random errors did reach 3.864 degreesC, the temperature over the wafer was maintained within 0.665 degreesC of the wafer center if the incident-heat-flux profiles were dynamically controlled according to the inverse results. These temperature non-uniformities could be acceptable in the advanced rapid thermal processing system. (C) 2002 Elsevier Science B.V. All rights reserved.
所屬典藏
期刊論文引用此條目
Lin, S., & Chu, H. (2002). Application of inverse problem algorithm for temperature uniformity in rapid thermal processing. THIN SOLID FILMS, 402(1-2), 280–289. https://doi.org/10.1016/S0040-6090(01)01630-3
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/29090