Thermal uniformity of 12-in silicon wafer in linearly ramped-temperature transient rapid thermal processing
檔案
- 000168502900005.pdf (380.3 KB, Adobe PDF)
日期
2001-05-01
類型
系所
期刊名稱
IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING
卷期與頁次
第 14 卷第 2 期,頁 143–151
ISSN
0894-6507
語言
英文
摘要
This paper presents a systematic method for estimating the dynamic incident-heat-flux profiles required to achieve thermal uniformity in 12-in silicon wafers during linearly ramped-temperature transient rapid thermal processing using the inverse heat-transfer method, A two-dimensional thermal model and temperature-dependent silicon wafer thermal properties are adopted in this study. The results show that thermal nonuniformities on the wafer surfaces occur during ramped increases in direct proportion to the ramp-up rate. The maximum temperature differences in the present study are 0.835 degreesC, 1.174 degreesC, and 1.516 degreesC, respectively, for linear 100 degreesC/s, 200 degreesC/s, and 300 degreesC/s ramp-up rates, Although a linear ramp-up rate of 300 degreesC/s was used and measurement errors did reach 3.864 degreesC, the surface temperature was maintained within 1.6 degreesC of the center of the wafer surface when the incident-heat-flux profiles were dynamically controlled according to the inverse-method approach. These thermal nonuniforimities could be acceptable in rapid thermal processing systems.
關鍵詞
inverse heat-transfer methodlinear ramp-up raterapid thermal processingthermal uniformity12-in silicon wafer所屬典藏
期刊論文引用此條目
Lin, S., & Chu, H. (2001). Thermal uniformity of 12-in silicon wafer in linearly ramped-temperature transient rapid thermal processing. IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 14(2), 143–151. https://doi.org/10.1109/66.920725
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/29700