Backside copper metallization of GaAs MESFETs using TaN as the diffusion barrier
檔案
- 000169044500002.pdf (116.8 KB, Adobe PDF)
日期
2001-06-01
類型
期刊名稱
IEEE TRANSACTIONS ON ELECTRON DEVICES
卷期與頁次
第 48 卷第 6 期,頁 1033–1036
ISSN
0018-9383
語言
英文
摘要
Backside copper metallization of GaAs MESFETs using TaN as the diffusion barrier was studied. A thin TaN layer of 40 nm was sputtered on the GaAs substrate before copper firm metallization. As judged from the data of X-ray diffraction (XRD), Anger electron spectroscopy (AES), and cross-sectional transmission electron microscopy (TEM), the Cu/TaN films with GaAs were very stable without interfacial interaction up to 550 OC annealing, The copper metallized MESFETs were thermally stressed at 300 degreesC, The devices showed very little change in the device characteristics (<3 %) after thermal stress, and the changes of the electrical parameters and RF characteristics of the devices after thermal stress were of the same order as those devices without Cu metallization, These results show that TaN is a good diffusion barrier for Cu in GaAs devices and the Cu/TaN films can be used for the backside copper metallization of GaAs MESFETs.
所屬典藏
期刊論文引用此條目
Chen, C., Chang, E., Chang, L., & Chen, S. (2001). Backside copper metallization of GaAs MESFETs using TaN as the diffusion barrier. IEEE TRANSACTIONS ON ELECTRON DEVICES, 48(6), 1033–1036. https://doi.org/10.1109/16.925222
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/29585