標題: A micromachined silicon-submount package for vertical emission of edge emitting laser diodes
作者: Shie, JS
Yu, SH
光電工程學系
Department of Photonics
關鍵字: laser diode package;vertical emission;micromachining;self-align soldering
公開日期: 15-五月-2000
摘要: A silicon-submount package structured with vertical emission of edge emitting laser diodes (LDs) is addressed. Utilizing the micromachining technique, a (100) silicon wafer can be engraved into a batch of submount structures having 45 degrees-slant mirrors for light deflection, and mesas for precise die dwelling. The mirrors are fabricated by deep V-groove etching with the etching window aligned to [100] crystal direction, and by multiple cycles of oxidation-and-isotropic etching processes. The initial ridged surface can thus be polished to a final roughness below 30 nm, with 100-mu m depth, sufficient to accommodate the vertically extended angle of a laser beam. Gold plating on the surface is patterned to form reflective mirrors on the slopes individually, and to provide the bases, which are connected to common electrode, for electroplating of thick indium pads selectively on the mesa areas. Self-alignment of LD bars or dice soldered right on the mesas can be achieved by the surface-tension mechanism that existed between the LD gold electrodes and the indium pads during melting. With simple TO-5 package, a vertically emitted beam has been observed on a stacked LD-submount device, as expected. (C) 2000 Elsevier Science S.A. All rights reserved.
URI: http://dx.doi.org/10.1016/S0924-4247(99)00373-8
http://hdl.handle.net/11536/30519
ISSN: 0924-4247
DOI: 10.1016/S0924-4247(99)00373-8
期刊: SENSORS AND ACTUATORS A-PHYSICAL
Volume: 82
Issue: 1-3
起始頁: 297
結束頁: 301
顯示於類別:會議論文


文件中的檔案:

  1. 000087063700047.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。