標題: Comprehensive investigation on fluorosilicate glass prepared by temperature-difference-based liquid-phase deposition
作者: Yeh, CF
Lee, YC
Wu, KH
Su, YC
Lee, SC
電子工程學系及電子研究所
Department of Electronics Engineering and Institute of Electronics
公開日期: 1-一月-2000
摘要: This study investigates the properties of fluorosilicate glass film prepared by temperature-difference-based liquid-phase deposition. Experimental results indicate that the deposition temperature can significantly affect the deposition rate and film properties. As the deposition temperature increases from 15 to 35 degrees C, the deposition rate increases exponentially from 30 to 687 Angstrom/h. Meanwhile, the F and OH contents increase from 2.56 to 3.49% and from 0.16 to 0.5%, respectively. The dielectric constants;ind stresses for the films deposited at 15, 25, and 35 degrees C, are 3.56/63 MPa, 3.46/43 MPa, and 3.66/73 MPa, respectively. The current densities at 2 MV/cm for the films deposited at 15, 25, and 35 degrees C are 6.9 x 10(-9), 4.6 x 10(-9), and 3.6 x 10(-7) A/cm(2), respectively. For the film deposited at 25 degrees C. the dielectric constant and the stress are minimal because of the high F content, low OH content, and low bond strain. The properties are also compared with those of fluorosilicate glass prepared by plasma-enhanced chemical vapor deposition. In addition to exhibiting a lower dielectric constant and much better resistance to moisture, the film prepared by temperature-difference-based liquid-phase deposition also shows a comparable or better insulating property, revealing a reliable intermetal dielectric with a low dielectric constant. (C) 2000 The Electrochemical Society. S0013-4651(99)04-019-7. All rights reserved.
URI: http://dx.doi.org/10.1149/1.1393195
http://hdl.handle.net/11536/30893
ISSN: 0013-4651
DOI: 10.1149/1.1393195
期刊: JOURNAL OF THE ELECTROCHEMICAL SOCIETY
Volume: 147
Issue: 1
起始頁: 330
結束頁: 334
顯示於類別:期刊論文


文件中的檔案:

  1. 000084832800048.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。