標題: FORMATION OF BILAYER SHALLOW MOSI2/COSI2 SALICIDE CONTACT USING W/CO-MO ALLOY METALLIZATION
作者: YANG, FM
CHEN, MC
電子工程學系及電子研究所
Department of Electronics Engineering and Institute of Electronics
關鍵字: SHALLOW CONTACT;W;MOSI2/COSI2/SI;SELECTIVE ETCHING;W-CO ALLOY;SILICIDE LATERAL GROWTH
公開日期: 1-Apr-1992
摘要: A very simple process to form a bilayer shallow MoSi2/CoSi2/Si silicided contact using W/Co54Mo46/Si bilayer alloy metallization has been developed. Two-step annealing in a conventional flowing-nitrogen furnace is employed. The first annealing is performed at a temperature of 500-600-degrees-C, with the W film passivating the underlying Co-Mo alloy layer from being oxidized and consuming some Co. A shallow contact is feasible by selectively etching away the remaining outer layer of the Mo-dominant Mo-Co alloy (or W-Co alloy) phase to deduct the metal source which would finally be transformed into silicides. Silicide lateral growth which is observed during the silicidation of Co on Si does not occur in the present system. This is presumably because the formation of CoSi2 is not preceded by Co2Si or CoSi due to the nonrich Co source in the Co-Mo alloy system. The second annealing performed at a higher temperature of 700-950-degrees-C is to further transform the CoSi2 and mixed-silicide layers obtained after the first annealing into separate layers of MoSi2 and CoSi2.
URI: http://hdl.handle.net/11536/3477
ISSN: 0021-4922
期刊: JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS
Volume: 31
Issue: 4
起始頁: 1004
結束頁: 1011
Appears in Collections:Articles


Files in This Item:

  1. A1992HV08000010.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.