Enhancement of the light conversion efficiency of silicon solar cells by using nanoimprint anti-reflection layer
檔案
- 000275073000038.pdf (400.8 KB, Adobe PDF)
日期
2010-03-01
類型
系所
期刊名稱
SOLAR ENERGY MATERIALS AND SOLAR CELLS
卷期與頁次
第 94 卷第 3 期,頁 629–633
ISSN
0927-0248
語言
英文
摘要
In this report, the results of the fabrication of nanostructured Si molds by e-beam lithography and chemical wet etching are presented. A home-made pneumatic nanoimprint system was used to transfer the mold patterns to a PMMA layer on a Si template using the spin-coating replication/hot-embossing techniques. The patterned PMMA layer was peeled off from the Si template and directly transferred onto the surface of a poly-Si P-N junction solar cell device to serve as the anti-reflection (AR) layer. It provides a simple and low-cost means for large-scale Use in the production of AR layers for improving solar cell performance. A drastic reduction in reflectivity of the AR layer over a broad spectral range was demonstrated. In addition, the great improvement on the light harvest efficiency of the solar cells from 10.4% to 13.5% using the nanostructured PMMA layer as the AR layer was validated. (C) 2009 Elsevier B.V. All rights reserved.
所屬典藏
期刊論文引用此條目
Chen, J. Y., & Sun, K. W. (2010). Enhancement of the light conversion efficiency of silicon solar cells by using nanoimprint anti-reflection layer. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 94(3), 629–633. https://doi.org/10.1016/j.solmat.2009.11.028
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/5743