標題: Effective surface treatments for selective epitaxial SiGe growth in locally strained pMOSFETs
作者: Cheng, P. L.
Liao, C. I.
Wu, H. R.
Chen, Y. C.
Chien, C. C.
Yang, C. L.
Tzou, S. F.
Tang, J.
Kodali, R.
Washington, L.
Cho, Y.
Chang, V. C.
Fu, T.
Hsu, W. S.
交大名義發表
National Chiao Tung University
公開日期: 1-一月-2007
摘要: Several dry and wet surface treatment methods are explored for a selective SiGe epitaxial film used to fabricate embedded SiGe pMOSFETs. Pre-clean conditions for the device wafers used in this study were limited by a realistic CMOS process window with tight thermal and chemical budgets due to dopant diffusion and hardmask erosion concerns. The effectiveness of these pre-clean methods is evaluated by SiGe epitaxial film quality and SIMS profiles of key residual contaminants such as C and O at the SiGe-Si substrate interface. As an effective low-temperature dry surface treatment, chemical bake in HCl/H-2 at temperature below 800 degrees C is found to reduce interface C and O peak concentrations by an order of magnitude. Wet clean in multiple cycles of DIW-O-3 (ozonated water), SC1 and diluted HF (DHF) is also presented to prepare epitaxial growth surfaces with accumulated damage and chemical residues from previous process steps. SiGe epitaxial film morphology is also observed to improve by increasing DHF clean time. For further improvement of film quality on the most difficult surfaces, Si seed layer was employed to initiate SiGe film nucleation and yield smooth film growth.
URI: http://dx.doi.org/10.1088/0268-1242/22/1/S33
http://hdl.handle.net/11536/5824
ISSN: 0268-1242
DOI: 10.1088/0268-1242/22/1/S33
期刊: SEMICONDUCTOR SCIENCE AND TECHNOLOGY
Volume: 22
Issue: 1
起始頁: S140
結束頁: S143
顯示於類別:會議論文


文件中的檔案:

  1. 000243752500034.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。