完整後設資料紀錄
DC 欄位語言
dc.contributor.author許武 憲 □Hsu, Wun Shanen_US
dc.contributor.author蘇 德 欽en_US
dc.contributor.authorSu Der-Chinen_US
dc.date.accessioned2014-12-12T02:14:47Z-
dc.date.available2014-12-12T02:14:47Z-
dc.date.issued1995en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#NT840124037en_US
dc.identifier.urihttp://hdl.handle.net/11536/60167-
dc.description.abstract本論文提出一種外差光學共軸的技術來量測物體表面的 粗糙度,運用 這技術的光學機構並與電腦結合,以達成自動化量測的目的並減少龐大資 料處理過程中的單調性,且能及時顯示測量結果也達到光電系統整合目的. 首先利用所調制的電光晶體得到差頻的目的,參考信號與測試信號之間的 相位差是粗糙的函數,藉由分析這函數可計算出表面粗糙度值. We utilized the principle which foci are different for parallel polarized beam and vertical polarized beam passing through birefringent lens ;the beamwhich it is focused on the sample surface and acts astest beam ; the other beam which is collimated and illuminates a small area on the sample surface and acts as reference beam . since E-O modulated , there is frequency difference between the two orthogonal linear polarized beams , then it measured phase change by a differential interferometer and is to infer roughness by phase chang . this arrangement is simple and analyze easily ; it do not damage the sample surface and relatively cheap to probe-roughness senor.zh_TW
dc.language.isozh_TWen_US
dc.subject電 光 晶 體zh_TW
dc.subject粗 糙 度zh_TW
dc.subject雙 折 射 透 鏡zh_TW
dc.subjectE-O crystalen_US
dc.subjectroughnessen_US
dc.subjectbirefringent lensen_US
dc.title光學外差表面粗糙度測量術zh_TW
dc.titleOptical heterodyne profilometryen_US
dc.typeThesisen_US
dc.contributor.department光電工程學系zh_TW
顯示於類別:畢業論文