標題: 以單晶鑽石刀具鉋削製作非球面微透鏡陣列之研究
Study on the Shaping of Aspherical Micro Lens Array Using Single-Crystal-Diamond Tool
作者: 劉世璋
Shih-Chang Liu
陳仁浩
Ren-Haw Chen
工學院精密與自動化工程學程
關鍵字: 鉋削;非球面微透鏡陣列;單晶鑽石刀具;表面粗糙度;形狀精度;Shaping;Aspherical micro lens array;Single crystal diamond tool;Surface roughness;Form accuracy
公開日期: 2004
摘要: 近年來,由於光纖網路的普及化,人們對高頻寬網路的需求越來越殷切,使得廣泛應用於光纖網路傳輸模組中的關鍵零組件--微透鏡陣列成為炙手可熱的研究項目之一。 本論文主要是研究如何利用超精密加工機搭配天然單晶鑽石刀具,以鉋削加工方式製作出非球面微透鏡陣列,並探討刀具的切削角度對非球面微透鏡陣列的曲面形狀精度及表面粗糙度的影響,期望能夠找出在鉋削非球面微透鏡陣列時的刀具最佳切削角度,以增加透鏡的光學品質。 從本論文中的實驗結果得知,影響非球面微透鏡陣列形狀精度的最主要因素是刀具的面傾斜角的角度大小。而當刀具切削角與透鏡的法線向量在80.7度至110.4度,切線向量在9.8度至20度之間時,將可使鉋削完成後非球面微透鏡陣列的表面獲得粗糙度(Ra)<10nm的滿意結果。
hese years, due to the optical fiber network is popularizing, research and development of micro lens array, which is the key component of optical fiber transceiver module, becomes vital. This thesis attempted to fabricate aspherical micro lens array by shaping process with ultra precision machine (4 axes) and single crystal diamond tool. Effects of cutting angles of diamond tool on the form accuracy and surface roughness of micro lens were investigated to find the optimum cutting angles of the tool for increasing the optical quality of the micro lenses. According to the experimental results, the back rake angle of single crystal diamond tool is the most important factor to the form accuracy of aspherical micro lens array. When the back rake angle is between 80.7 and 110.4 degree, and the front clearance angle is between 9.8 and 20 degree, satisfactory results of lens surface roughness(Ra) which is less than 10nm can be obtained.
URI: http://140.113.39.130/cdrfb3/record/nctu/#GT009169502
http://hdl.handle.net/11536/64301
Appears in Collections:Thesis


Files in This Item:

  1. 950201.pdf
  2. 950202.pdf
  3. 950203.pdf
  4. 950204.pdf
  5. 950205.pdf
  6. 950206.pdf
  7. 950207.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.