完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Wang, Wen-Chieh | en_US |
dc.contributor.author | Wu, Chung-Yu | en_US |
dc.date.accessioned | 2014-12-08T15:08:38Z | - |
dc.date.available | 2014-12-08T15:08:38Z | - |
dc.date.issued | 2009-10-01 | en_US |
dc.identifier.issn | 0916-8524 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1587/transele.E92.C.1291 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/6628 | - |
dc.description.abstract | A low-power K-band CMOS current-mode up-conversion mixer is proposed. The proposed mixer is realized using four analog current-squaring circuits. This current-mode up-conversion mixer is fabricated in 0.13-mu m 1P8M triple-well CMOS process, and has the measured power conversion gain of -5 dB. The fabricated CMOS up-conversion mixer dissipates only 3.1 mW from a 1-V supply voltage. The VCO can be tuned from 20.8 GHz to 22.7 GHz. Its phase noise is -108 dBc/Hz at 10-MHz offset frequency. It is shown that the proposed mixer has great potential for low-voltage and low-power CMOS transmitter front-ends in advanced nano-CMOS technologies. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | CMOS | en_US |
dc.subject | current-mode | en_US |
dc.subject | K-band | en_US |
dc.subject | up-conversion mixer | en_US |
dc.title | A Low-Power K-Band CMOS Current-Mode Up-Conversion Mixer Integrated with VCO | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1587/transele.E92.C.1291 | en_US |
dc.identifier.journal | IEICE TRANSACTIONS ON ELECTRONICS | en_US |
dc.citation.volume | E92C | en_US |
dc.citation.issue | 10 | en_US |
dc.citation.spage | 1291 | en_US |
dc.citation.epage | 1298 | en_US |
dc.contributor.department | 電子工程學系及電子研究所 | zh_TW |
dc.contributor.department | Department of Electronics Engineering and Institute of Electronics | en_US |
dc.identifier.wosnumber | WOS:000272395100009 | - |
dc.citation.woscount | 0 | - |
顯示於類別: | 期刊論文 |