完整後設資料紀錄
DC 欄位語言
dc.contributor.author林信嘉en_US
dc.contributor.author梁耀文en_US
dc.date.accessioned2014-12-12T02:28:14Z-
dc.date.available2014-12-12T02:28:14Z-
dc.date.issued2004en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#GT009212583en_US
dc.identifier.urihttp://hdl.handle.net/11536/68801-
dc.description.abstract為了提升電力系統之電壓供應品質,本論文利用可變結構控制理論來設計電壓調節器用以有效的達到電壓調節的目的。 利用Dobson和Chiang在1988年所提出的電力系統模型並假設在系統中電容器與變壓器為有效的控制輸入,在本論文提出了電壓調節器之設計準則。 更進一步我們以容錯控制的觀念來設計主動式及被動式容錯控制律,使得系統在控制器發生故障或異常情況時,依然可以達到電壓調節的目的。 此外,為了達到主動式容錯控制之目的,本論文也提出了錯誤偵測與診斷的機制, 用以偵測與診所控制器是否發生故障或異常情況。 由模擬結果驗證了可變結構控制器與容錯控制器之可行性。zh_TW
dc.description.abstractIssues concerning the design of an effective voltage regulator in a power system are studied in this thesis. By adopting a model from Dobson and Chiang (1988) and assuming the available control input being the capacitor and tap changer, two classes of Variable Structure Control (VSC) voltage regulators are proposed to promote the quality of power supply. These regulators are shown to be able to achieve the regulation task. The reliability issues of the regulation when one of the control inputs experiences outage are also taken into account through VSC technique in this thesis. Both passive and active reliable designs are proposed and are shown to be effective from simulation. However, due to the fault information, the performances of regulation by active reliable design are in general better than those by passive one.en_US
dc.language.isozh_TWen_US
dc.subject電壓調節zh_TW
dc.subject可變結構控制zh_TW
dc.subject容錯控制zh_TW
dc.subject電力系統zh_TW
dc.subjectvoltage regulationen_US
dc.subjectvariable structure controlen_US
dc.subjectreliable controlen_US
dc.subjectpower systemen_US
dc.title應用可變結構設計於電力系統中電壓調節及其可靠度之研究zh_TW
dc.titleStudy of Voltage Regulation and its Reliability Using Variable Structure Scheme in a Power Systemen_US
dc.typeThesisen_US
dc.contributor.department電控工程研究所zh_TW
顯示於類別:畢業論文


文件中的檔案:

  1. 258301.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。