標題: 以瓶頸機台負荷評估晶圓廠投料決策
A Wafer Start Policy By Loading Of Bottleneck Machine For Semiconductor Fabrication
作者: 吳玫慧
Wu, Mei-Hui
巫木誠
Wu, Muh-Cherng
管理學院工業工程與管理學程
關鍵字: 晶圓廠;訂單式生產;庫存式生產;瓶頸機台;投料決策;semiconductor fabrication;make-to-order;make-to-stock;bottleneck machine;job release policy
公開日期: 2013
摘要: 本論文以半導體晶圓製造廠為對象,針對同時存在訂單式生產與庫存式生產模式的日投料決策進行研究,此決策目的主要在使瓶頸機台的每日在製品需求變異最小化,以降低產品生產週期時間的變異。本研究發展出四種投料方法(M-1、M-2、M-3、M-4)後,以Flexsim模擬軟體建立模型進行實驗,並利用ANOVA對模擬結果進行分析。其分析結果指出M-1投料方法明顯優於其他三種投料方法。
This research studies the daily job release policy for a semiconductor wafer fab, operating in a scenario which involves both MTO (make-to-order) and MTS (make-to-stock) orders. The objective of the job release policy is to minimize the work-in-process (WIP) deviation of the bottleneck workstation, in order to reduce the deviation of cycle time. Four heuristic methods (M-1, M-2, M-3, and M-4) are developed in this study and justified by a simulation program coded in Flexsim (proprietary discrete event simulation software). Simulation results indicate that method M-1, by the ANOVA test, significantly outperforms the other three ones.
URI: http://140.113.39.130/cdrfb3/record/nctu/#GT070063318
http://hdl.handle.net/11536/74087
顯示於類別:畢業論文